Honest comparison
Looking for a Factory I/O alternative? It depends what you want to practice
Factory I/O is excellent software. But a lot of people searching for an alternative don't actually want to program a PLC. They want to get better at finding faults on one. Those are different skills, and they need different tools.
Last updated: November 2026 · written and reviewed by a working maintenance professional
First: what are you actually trying to learn?
Factory I/O is a 3D virtual factory you connect to a PLC (real, or a software PLC) and program. You write the logic, the conveyors and sorters move, and you see if your program works. If you're learning ladder logic, studying for a controls course, or want a plant to test code against, it's one of the best tools there is.
But on a plant floor, most calls aren't "write a program." They're "the line's down." The program worked yesterday. Something in the field broke: a fuse, a sensor, a wire, a coil, a coupling. The skill there is diagnosis: reading the I/O, following the rung, putting a meter in the right place, and not replacing good parts. That's the gap Line Sim was built for.
Side by side
| Line Sim (faultline101) | Factory I/O | |
|---|---|---|
| Main job | Practice troubleshooting faults | Practice programming a PLC |
| Runs on | Any browser: phone, tablet, PC | Windows PC (download) |
| Price | 6 callouts free, no login. All callouts come with the full faultline101 trainer (one-time purchase) | From about €109 (Starter) to €765 (Ultimate) one-time, or yearly plans |
| PLC needed | No, built-in PLC with a live ladder view | Connects to real or soft PLCs (Starter includes a built-in simulator) |
| Faults | Fuses, terminals, coils, PLC output points, sensors, air, mechanical | Sensor and actuator "always on / always off" failures |
| Electrical print + meter | Yes: volts, ohms under lockout, clamp amps | Not a listed feature |
| Scoring | Time, wasted parts, hints and safety | Not a listed feature |
| Scenes | One sort cell today (more coming) | 20+ 3D scenes and a drag-and-drop editor |
| Write your own program | No, it's a diagnosis trainer | Yes, that's its strength |
Factory I/O is a product of Real Games. Features and prices are from factoryio.com as of October 2026 and may change.
Pick Factory I/O if…
- You're learning to write ladder logic, structured text or function blocks.
- You have a PLC (or a soft PLC) and want a realistic plant to test code against.
- You want lots of different 3D scenes, or to build your own.
- You're on a Windows PC and don't mind installing software.
Pick Line Sim if…
- You work maintenance or controls and want to get faster at finding faults, not writing code.
- You're training apprentices and want them to practice diagnosis without touching a live line.
- You want to practice with a meter on a print: volts to neutral, volts across a part, ohms only after lockout.
- You want something you can open on your phone on break, with nothing to install and no account.
Plenty of people will want both: Factory I/O to learn how the logic is built, Line Sim to learn how it fails.
What a Line Sim callout looks like
You get one line from the operator, like “Line's dead. The PLC lights come on and Start seems to do something, but the belt never moves.” That's all. From there it's up to you:
- Investigate. Watch the PLC input and output lights, read the ladder online, force I/O, and take meter readings on the print.
- Repair. Pick a fix from the repair menu. Every repair costs parts and minutes, and replacing something that wasn't broken counts against you.
- Prove it. The fix only counts once the line sorts three boxes clean with every force removed, the same way you'd prove a repair before handing a line back to production.
Then you get a score out of 1000 and a debrief explaining the fault and the fastest path to it.
Practice this on a machine you can't break.
Line Sim is a free troubleshooting simulator: a conveyor and sorting cell with a real PLC program, live I/O lights, and an electrical print you can put a meter on. You get a callout, only what the operator told you, and you're scored on time, wasted parts and safe meter use.
Runs in your browser, works on a phone, no login. Six callouts are free.
Try Line Sim freeThe bottom line
If you want to program, use Factory I/O. If you want to troubleshoot, try Line Sim. It's free, and it takes about ten minutes to find out whether you'd have found the fault faster than the last guy who swapped three parts.
Quick answers
Is there a free alternative to Factory I/O?
For PLC troubleshooting practice, yes. Line Sim by faultline101 runs free in any browser with no download or login. It has a built-in PLC with a live ladder view, an I/O table you can force, and an electrical print you can test with a virtual meter. Six fault callouts are free. It does not let you write your own PLC program, which is Factory I/O's strength.
What is the difference between Factory I/O and Line Sim?
Factory I/O is 3D Windows software for learning to program a PLC against a virtual plant, with 20+ scenes and a scene editor. Line Sim is for learning to troubleshoot: you diagnose hidden electrical, PLC, sensor, pneumatic and mechanical faults and are scored on time, wasted parts and safe meter use.
Does Line Sim need a PLC or programming software?
No. Line Sim has its own built-in PLC running an 11-rung ladder program. You don't need a real PLC, RSLogix, TIA Portal or any download. It runs on a phone, tablet or PC browser.
Think you'd have found it faster? Take a free callout in Line Sim — no login, works on your phone.
Try Line Sim free