NEW PLC troubleshooting simulator: try 6 callouts free on your phone →

Industrial troubleshooting training

The industry needs troubleshooters,
not parts‑changers.

Anyone can swap parts until the machine runs again. It's expensive, it's slow, and it burns through inventory that was never the problem. faultline101 trains the skill the plant floor actually needs: diagnosing the real fault across motors, pumps, hydraulics, pneumatics, drives, sensors, and controls — so the right part gets changed the first time.

Works with no signal — install it once and the whole course runs right at the machine, in the dead zones where the work actually happens. Every competing platform needs a connection.

Written and reviewed by a working maintenance professional — not a textbook.

Works fully offline Installs on your phone Buy once, yours forever

Line Sim: a conveyor sort line with photo-eyes, an air diverter pushing a tall box into the reject bin, and a stack light

New · 6 callouts free · works on your phone

Line Sim: a live machine with something broken on it. Can you find it?

A practice conveyor line with a real PLC program, PLC lights you can watch, and an electrical print you can put a meter on. Take a callout, find the fault, fix it, and prove it runs. Wrong parts cost you points.

  • 16 real callouts, 6 of them free: blown fuses, welded contactors, lost phases, loose wires, dead PLC outputs and more
  • Scored like a real shift: time, wasted parts, hints and safe meter use
  • NEW: 6 machines to program: a ladder editor that works on your phone, for a sort line, tank, traffic light, garage door, pump + VFD and batch mixer. Timers, counters, compares, math, analog, a trend chart and share links. Free.
  • Nothing to install: no PLC, no software, and no account for the free ones
Take a free callout →

Parts-changing is the expensive habit. Troubleshooting is the fix.

Every plant has felt it: a machine goes down, and the response is to start swapping parts and hoping. A new sensor. Then a new drive. Then a new motor. Three parts later the line is running again and nobody actually knows what was wrong — which means it'll happen again.

Downtime is the real cost

Every minute a line is down is lost production. A technician who diagnoses the actual fault gets it running sooner than one who swaps parts one at a time hoping something sticks. Speed comes from knowing where to look, not from a bigger parts crib.

Wrong parts are wasted money

Every part changed that didn't need changing is money spent, inventory burned, and often a new problem introduced. Real diagnosis means the right part gets replaced once — not a shelf's worth of guesses.

The skill is portable

A parts-changer knows one machine. A troubleshooter can walk up to a motor, a pump, a hydraulic press, or a control loop and reason through it. That multi-skilled diagnostic thinking is what makes a technician valuable anywhere.

How it feels to use

Live readings. Real consequences.

Every scenario runs on live gauges — temperature, current, pressure, vibration — that respond to what you check. There's no hidden "correct answer" screen. The evidence is the answer, exactly like a real callout.

Industrial control panel with glowing indicators in a dark plant

Not another slide deck with a quiz bolted on

Live gauges, not multiple choice

Every scenario runs on real readings — temperature, current, pressure, vibration — that shift based on what the learner checks. There's no hidden "correct answer" screen; the evidence is the answer.

Branching decisions

You choose what to check, in what order, and the readings respond. Chase a wrong theory and you'll see it cost you — exactly like a real callout, minus the downtime.

Scored like the real job

Every scenario tracks a score based on the choices you make and the detours you take. Guessing and swapping parts you didn’t need to costs points. Beat your own best. The goal isn't a passing grade — it's the fastest correct diagnosis.

No two runs are the same

Every practice session draws scenarios at random from the module's pool and shuffles the order. You can't memorise "it's always the bearing" — you have to actually diagnose, every time.

One tool, every discipline

Motors, pumps, hydraulics, pneumatics, VFDs, sensors, conveyors, vibration, contactors, control loops — all in one place. Most training locks you into a single specialty like PLCs. Real maintenance work crosses all of them, and so does this.

A certificate that means something

The final exam pulls questions from every module a learner has actually completed, and won't unlock until they've done the work — not a survey people click through in ninety seconds.

What's covered

Every module below is a fully working simulation in the trainer right now — this isn't a roadmap, it's the current library.

Who it’s for

Technical trade school training lab

Trade & technical schools

Give students repeated, safe reps at diagnostic reasoning before they're standing in front of real equipment under time pressure.

Apprentice technician working on a control panel

New hires & apprentices

A structured first few weeks that builds the habit of cheapest-check-first, instead of reaching for a parts catalog on instinct.

Maintenance team around a control panel

Plant training teams

Buy a pool of seats, invite your techs by email, and see who can actually troubleshoot in one supervisor dashboard. Nothing for IT to install.

Works where the work is

No signal. No problem.

The fault doesn't wait while you walk back to the office. Install faultline101 on your phone and the whole trainer — all 35 modules, 210 real faults — sits on the device. Open it in a basement, an MCC room, the far end of a plant with no bars, and it just works. What you complete is saved on the phone and syncs itself the moment you're back in range.

The entire course is under 200 KB — less than one photo of the panel you're standing in front of. Nothing to buffer, nothing to wait for.

Every other training platform Needs a connection And a desk, and a browser tab
faultline101 on your phone Works with the radio off Install once — ready at the machine

No subscription trap

Buy it once. It's yours. Forever.

Every other troubleshooting platform rents you access by the month — stop paying and you lose everything, even after spending hundreds of dollars. The Full Catalog is a one-time purchase. Pay once, own all 35 modules for good, and come back to practice whenever a fault has you stumped. No recurring charge, no access that evaporates when you cancel.

And when we release new modules, they're added to your library at no extra cost — no subscription, no upgrade fees.

Subscription platforms $50–60 / month, forever Stop paying → lose access
faultline101 Full Catalog $49 CAD, once Yours permanently

Pricing

All prices in Canadian dollars. Checkout is handled securely by Stripe — this site never sees your card details.

Free

$0 CAD

The full Module 1 experience — Motor overheating & winding faults — all 6 scenarios, forever. See exactly how it works before you pay a cent.

  • Module 1 in full (6 scenarios)
  • Randomised scenario draw
  • Knowledge check & scoring

For crews, plants & schools

Train a whole crew — and see who can actually troubleshoot.

Individual licenses don't include supervisor tools. Team plans do: buy a pool of seats, invite your technicians by email, and see every tech's progress, scores and certification in one dashboard.

  • Supervisor dashboard — completion, scores & certification per tech
  • Competency matrix — spot the skills your whole crew is thin on
  • Invite, reassign or remove technicians as your crew changes
  • Every current and future module, for every seat
  • Every Line Sim simulator callout, for every seat
  • One invoice · 30-day money-back guarantee

$89 CAD / seat / yr

Choose your seat count at checkout
Training 10+ techs or a full class? Ask about crew & school pricing

Your progress and scores are saved to your account and follow you across devices. Stripe handles all payments securely — this site never sees your card details. Not happy within 30 days? Contact us for a full refund. Team plans renew yearly; cancel anytime from your Stripe customer portal.

Questions

Do learners need to create an account?

Yes — each learner signs up with an email (it's quick and free for Module 1). That way their progress, scores, and certification save to their account and follow them across any device. Teams get a supervisor dashboard that tracks every technician's progress and certification in one place.

Can we add our own equipment scenarios?

Yes. Every module is a structured entry in one content file, so adding a scenario specific to your equipment doesn't require touching the application code.

Is the certificate independently verifiable?

Yes. Every certificate carries a unique ID and a link like faultline101.com/verify/K7QM-29FP. Anyone, such as an employer or an instructor, can open it to confirm the holder's name, certification score, modules completed and issue date. The score comes from our server record of the exam, so it can't be edited.

What equipment areas does it cover today?

Motors, pumps, PLC/sensor circuits, pneumatics, VFDs, hydraulics, conveyors, vibration analysis, contactors, and PID control loops — see the full list above.

What do I actually get when I pay?

The Free plan gives you Module 1 in full — all 6 scenarios, forever, no card needed. The $49 Full Catalog (founding price, rising to $79 on December 1, 2026) unlocks all 35 modules permanently, and every new module we release is added at no extra cost. Team plans are per seat, per year, and add a supervisor dashboard with progress, certification and a competency matrix for your crew. Every purchase comes with a 30-day money-back guarantee.

What if it's not right for me?

Every purchase comes with a 30-day money-back guarantee. If faultline101 isn't helping, contact us within 30 days of buying and we'll refund you in full — no forms, no hoops.

How do you handle my password?

Passwords are hashed (never stored in plain text) and checked server-side over HTTPS. We don't have access to your actual password, only the hash used to verify it.

Tales of a Troubleshooter Volumes One and Two — comic book covers

New — Volume Two is out

Tales of a Troubleshooter

Thirty-six true(-ish) shop-floor rescues across two volumes, told as comics — where the machine's broke, the crew's certain, and the fault's hiding in plain sight. Funny, brutally honest, and every story sneaks the lesson in under the punchline. Instant PDF, Kindle, or paperback.

See it diagnose a fault in under two minutes.